|
|
Post by jchoffa on Aug 20, 2017 4:26:52 GMT
I paid for 1 GB upgrade. How do I tell if I got it?
|
|
merps
New Member
Posts: 20 
|
Post by merps on Aug 20, 2017 12:47:47 GMT
I paid for 1 GB upgrade. How do I tell if I got it? Doyodo actually posted info on how to do this. Check here: retroengine.doyodo.com/markdown-23/You have to go to the Desktop, so you'll need a keyboard and mouse, though. |
|
|
|
Post by rittersport on Aug 20, 2017 13:19:43 GMT
You don't technically need a mouse. The free version of the Unified Remote app can act as a mouse.
On that subject, is there a list of keyboard shortcuts for the Desktop? Most versions of Linux I've used allow you to press Window-T for terminal, Window-F for file manager, etc., but I've tried all kinds of key combinations with no luck.
|
|
|
|
Post by WhoThere on Aug 25, 2017 4:34:09 GMT
Props to wryly for the breakdown above on how to flash and add retrorangi pi... I recommend flashing the drive to run retrorangepi lite to those having issues. For me I was missing half the emulators on the main retroemulation screen. I also did not the wifi override initially so this may have something to do with the issues I was having. Even after a full reinstall of the packages I still was missing emulators even though they said they were installed and I loaded up roms for it. Loaded up retro range pi lite and it seems to be working great (plus no lame guitar riff when you turn it on!)
Got SNES and GBA working and it even recognizes my controller now. Will try N64 and PSX when I get a chance this weekend.
GLHF folks!
|
|
|
|
Post by norska on Aug 29, 2017 8:46:54 GMT
Is someone try bluetooth controller with the retrorangepi system ?
For my part, even if Controllers didn't work with the retroengine system (Xbox ask for a PIN, wii is pairing but not recognize after that and generic one recognize as keyboard...), I can't see any bluetooth device with retrorangepi...
Is there a specific repository or thing to do ?
|
|
wryly
Junior Member
Posts: 72
|
Post by wryly on Aug 30, 2017 0:57:42 GMT
I think it's somewhere in the retroarch settings, but I've not looked into it myself.
|
|
|
|
Post by brad on Sept 2, 2017 20:25:51 GMT
How do you pair the Re ps style Bluetooth controller. I followed the instructions on the help site but the p1 light only shows when it's plugged in via usb. RE+x does nothing. No lights flash or anything. Any tips?
|
|
azer
New Member
Posts: 3
|
Post by azer on Sept 5, 2017 14:27:44 GMT
hi,
I also galley to install my ps3 controller in bluetooth.
I would even say that I put it by chance.
I first turned on the console, then once at the desk I plugged the bluetooth key.
I went into retropie / RP set up / configuration / bluetooth.
I plugged the controller by usb without the power on I waited 20 sec, I turned on the controller, then I unplugged it, I came out of retropie, I restart the console and once on the menu I press to turn on the joystick, it has to search a little and it is connected
|
|
